COOLMAN D900

The world’s smallest laser rangefinder

Measuring rooms or entire homes with a meter rule is time-consuming and a great deal of work. With the world’s smallest laser rangefinder, the DLE 50 from Bosch, the work is done by a laser beam to measure much more precisely and quickly. At the touch of a button, lengths, areas and even room volumes are automatically displayed.

The DLE is so small, it fits in any shirt pocket. You can carry it in its bag on your belt and always have it at your side ready for use. The soft grip cover makes the DLE 50 fit perfectly in your hand and also protects the innovative laser measuring device from shocks.The DLE 50 sets new standards
Around 80 to 90% of all distance measurements required can be quickly carried out by the DLE 50. Clear symbols ensure simple operation: You decide whether you wish to calculate the length, area or volume of a room and the DLE 50 does the rest using its intelligent laser beam.

The DLE 50 measures with absolute precision: It calculates distances up to 50 meters to an accuracy of +/- 1.5 millimeters. Simply aim the laser at the target for your measurement. If you also measure the height, the display immediately shows you the room’s volume.

Even obstacles are no longer a problem: Using the “Indirect Measurement” function, the DLE 50 uses the Pythagoras model to calculate distances, heights and lengths that cannot usually be measured directly. The adding function allows you to extend the measured distance to 100 meters.

Free choice of measuring point
At the touch of a button, you can choose whether the measuring result is to be calculated from the front or back edge of the DLE 50, from the tripod or using the integrated stop pin. The device uses the relevant measuring point as the basis for its calculation. With the integrated stop pin, you can measure in spots that are difficult to reach. In such cases, the device measures the distance from the end of the stop pin.

The innovative DLE 50 laser range finder from Bosch is ideal for anyone who values precision, speed and reliability in their daily work.

And: The DLE 50 is not only the world’s smallest laser rangefinder – it is also much cheaper than others.

COOLMAN 750mm Wall Saw Blade Movie

 

This is our COOLMAN 750mm Wall Saw blade for cutting reinforced concrete with Y16mm BRC and the cutting depth was 200mm- 230mm

Take a look on the cutting speed and smoothness of this blade.

 

你的锯片一片要卖多少钱？

最近南马来了几通有关锯片的电话询问，要求450mm x 8mm x 27mm x 4.0mm 规格。

零售商们纷纷都打电话来询问： 有没有这样规格的锯片啊？你有30片吗？你的价格是多少啊？怎么你的贵过某某公司的啊。。。一切询问就是想要争取供货主导。

很遗憾的是零售商却不知道什么是8mm , 什么是4.0mm , 切割什么材料也说不出口。 只知道买者要求的规格锯片不可轻易改变。

试问，如果迪德没有8mm ,但有10mm ,可以吗？ 再问，迪德没有高频焊，而有激光焊可以吗？不行？哎呀~还真头疼，明天就叫厂家马上生产这样的锯片规格！？^-^

其实，8mm的意思就是刀头的高度。10mm 的刀头基本上要是同样的配方寿命比8mm的长。

激光焊接是确保锯片在切割材料的时候不会有刀头掉落的现象发生，而高频焊要是水源不足或切割到一个程度也许就会有掉刀头的现象。

4.0mm 是锯齿的厚度，27mm 是中心孔， 而450mm 就是锯片的直径了。

最重要的，客户是切割什么材料，切割多深，什么样的割机性能，有无切割经验？

这一切虽然看起来很多余，但选择正确的锯片的关键就在这一些问题。是不是说卖锯片就不需多关注客户的需求，只想要锯片比某某品牌的好，价格便宜，有货源就可以把这门生意成交了？

更令人惊讶的甚至一些零售商还担心我们迪德公司会像某某公司，potong jalan （抢客户）呵呵！太有趣了。

零售商们，如果再一次问我是否会potong jalan 抢你的客户，我的答案是会的，而且一定会。只要您从来没想过要代理迪德的产品，我们迪德成员一定会转变市场，呵呵！一家稳健，信誉好和拥有商道理念的公司是不会在乎用户是否会和我们交易，而在乎的是我们是否把锯片的知识和指导有效的传达给用户，对用户的需求加以关注，这样的服务我们做足了吗？就算用户流失了也无法怪罪他人，只能自我检讨，才能真正对症下药，寻求改变。

给我尊敬的用户，

价格不就只是那几个号码。350马币和450马币确实差距是很大，350马币听起来蛮吸引人的，全场最便宜了，没有人可以再便宜了，还不买吗？试想，如果350马币的锯片能切材料高达150米，而450马币的锯片却能切割250米。试问，350马币的锯片真的替你省钱了吗？

迪德公司从不以价位为主要竞争，而是如何真正的替用户省钱才是我们真正的市场推动力。希望用户和零售商明白，便宜的锯片不代表不好，而贵的锯片也未必会让您受到亏损。最主要的还是如何选择正确的锯片来切割您的材料，不但能有效的省钱，也避免耽误切割工作情况发生。

800mm COOLMAN Wall Sawing at Johor , Malaysia

Let us share with you guys our COOLMAN Wall Saw Blade 800mm running the job of cutting reinforced concrete with Doulbe Y32mm steel inside. It is quite tuff to cut off the steel . However, this blade make it done.

Guys ~ can you see it ? the rebarare of Y32mm are 4nots in a group. It tooks 2 hours to cut both side.

We’re not only talk on the table , we prove it at site.

Let us share this movie captured with you.This is a project for cutting concrete piles dimension from 400mm – 600mm piles. 230mm/ 9″ COOLMAN HS PURPLE blade is used to perform the cutting properties.

 

COOLMAN Multipurpose Blades now in Malaysia

DITEQ TOOLS has introduced a new cutting blade for rescue saw called COOLMAN Multipurpose Blade.

It cuts the following materials :

• Auto-Bodies & Frames
• Iron
• Steel – 1/4“- 5/8”
• Stainless Steel
• Ductile Pipe
• Guard Rails
• Hurricane Glass
• Security Glass
• Fiberglass
• Aluminium
• Brass
• PVC Pipe
• Plastic
• Roof Tile
• Copper
• Metal Roofing
• Hard brick
• Concrete Block
• Reinforced concrete with rebar steel
• Steel Door
• Security Bars
• Door Lock
• Wood / Plywood 2×4
• and many more ……

The COOLMAN Multipurpose blade, CUT ANYTHING , ANYWHERE , ANYTIME

The diamonds are attached to the blade through a vacuum brazing process, instead of the electroplating oricess used to manufacture other diamond blades.

The Vacuum brazing process means that we are able to use a thinner layer of bonding alloy to permanently fuse the cutting diamonds to the substrate. This exlusive process leave 30% more of the diamond’s cutting face and edges exposed for faster, cooler cutting and significantly longer diamond cutting life.

( information from cutting edge )
See Movie attached :

 

 

 

 

 

 

 

 

当您购买锯片时，您的选择是。。。。

Brokk 50

The smallest demolition robot in the Brokk family is Brokk 50. Originally introduced to strip down tiles in old bathrooms, Brokk 50 is able to pass through 60 cm wide doorways and is therefore the perfect machine wherever narrow openings have to be considered. It can be transported in a standard passenger elevator or even climb up and down ordinary stairways. Once in place, the working capacity of Brokk 50 is surprisingly high despite its small size. The most common tool used on the Brokk 50 is the SB52 hydraulic breaker, which has been especially developed for the machine. Other optional attachments include a concrete crusher, bucket, clamshell bucket and grapple. Brokk 50 can often replace hand-held tools and complete the task up to four times faster, or take the place of 4 – 6 workmen. The operator works from a safe position and is not exposed to unhealthy vibration. The low weight of Brokk 50 enables it to be used in most normal buildings, even on weak floor structures. Its small dimensions also allow it to operate in very confined spaces, such as bathrooms of only 3 sq m floor area. Although indoor demolition is the most common task for Brokk 50, many other industries have chosen to use this small and versatile model as well. Wherever the size paired with the remote control capability are determining features, it is a Brokk 50 job. Demolition in nuclear industries is one such specialised area where Brokk 50 enjoys an excellent reputation.

About Diamond Wire Sawing

The diamond wire saw originated as a tool for the stone industry approximately 15-20 years ago. It was successfully applied to the cutting of reinforced concrete in the early 1980’s.Much of the success of the wire saw is due to the increase in productivity acquired. The job is completed in less time and with less manpower than required by conventional demolition methods. Conventional methods, which use jackhammers, hoe-rams, explosives and the like, create a considerable amount of noise, dust and vibration. The diamond wire saw on the other hand, creates very little noise, no dust, and does not weaken surrounding structures because of vibration. Also, the length of the wire is virtually unlimited – any size cut can be made.In operation, the diamond-embedded wire is driven and guided by a pulley system. The guide wheels or pulleys are mounted near the structure to be removed and generally are no larger than 16′ in diameter. The power unit can be placed several yards from the work area. The pulley system allows for the removal of heavy reinforced concrete where the work space is limited or in areas that pose a safety hazard for the operator.